The Modine Hot Dawg is a Garage, Workspace, and Outbuilding Heater, suitable for residential, commercial, or industrial settings. For applications requiring a low profile unit, the Modine Hot Dawg Heater may be installed in work spaces just one inch below the ceiling. The superior quality matched with the features below makes the Hot Dawg unit heater an easy choice for a variety of buildings. The Hot Dawg Heater is the answer to your heating needs! Its low profile design makes it the easy choice to heat your garage, barn, or shop.
Modine Hot Dawg HD-100 - 100,000 BTU - Unit Heater - NG - 80% AFUE - Power Vented - Aluminized Steel Heat Exchanger
Modine Hot Dawg HD-100 - 100,000 BTU - Unit Heater - NG - 80% AFUE - Power Vented - Aluminized Steel Heat Exchanger
Sold out
FREE Shipping!
- Description
- Specifications
- Product Manuals
| Product Line | Hot Dawg |
| Manufacturer Part Number | HD100AS-0111-FBAN |
| Applications | Unit Heater, Garage Heater, Workshop Heater, Loading Dock Heater, Supplemental Heater |
| Warranty | Parts: 2 Years, Heat Exchanger: 10 Years |
| Fuel Type | Natural Gas |
| Heating Capacity (BTUs) | 80000 BTU |
| Heat Exchanger Material | Aluminized Steel |
| Air Flow Capacity (CFM) | 1490 |
| AFUE | 80% |
| Vent Type | Power Vent |
| Orientation | Horizontal |
| Gas Conversion Kit | Available |
| Air Throw (feet from face of unit) | 42 |
| Gas Piping Diameter | 1/2 Inch |
| Flue Connection Size | 4 Inches |
| Voltage | 115 Volts |
| Frequency | 60 Hz |
| Phase | 1 |
| Certifications | UL Listed, CSA listed |
| Product Depth (in.) | 31 Inches |
| Product Height (in.) | 20 1/2 Inches |
| Product Width (in.) | 35 1/2 Inches |
| Product Dimensions (in.) | 20 1/2 x 35 1/2 x 31 Inches |
| Shipping Weight (lb.) | 125 pounds |
| Package Quantity | 1 |
| Import Designation | Made in USA |
| Country of Origin | United States |
| Service Manual | https://cdn.shopify.com/s/files/1/0482/0045/0206/t/4/assets/1643759afebc--HD-Troubleshooting-Guide-6-586.pdf?v=1631897135 |
| Install Guide | Hot_Dawg_Installation_and_Service_Manual_6-583.pdf |
GET WARM.
STAY FOCUSED.
Quickly warm your space and focus on your projects with the near silent Modine Hot Dawg Heater.
Hush-Puppy Quiet Operation & Compact Design
The Modine Hot Dawg is incredibly quiet during operation. It warms your space without the distraction of a loud machine running while you work or relax.
It also features a low-profile, lightweight design and can be mounted with a one inch clearance from the ceiling on only two angle brackets, keeping the unit heater out of your way.
Don't Get Caught in the Cold With a Cheap Heater
With a rugged aluminized steel heat exchanger, baked-on corrosion resistant polyester paint, and casing construction made of heavy guage metal, you can rely on the Hot Dawg to heat your garage or shop for years to come. This is all backed by a full 10-year warranty on the heat exchanger.
Full 10-Year Warranty on Heat Exchanger
Low-Maintenance Upkeep and Efficient Heating Save You Time and Money
The motor on the Hot Dawg has a permanent, long-lasting lubricant straight from the factory. This means that the motor never has to be oiled, reducing maintenance costs, general wear and tear, and operational noise.
A power venting system on the unit quickly and efficiently brings flue exhaust from the unit heater to the outdoors, and requires minimal installation labor.
Electric wiring knockouts and field wiring connections on the heater keep installation costs low and save time during installation and maintenance by simplifying all required electrical work.
Frequently Asked Questions
can the Heater be connected to a thermostat?
Yes! Thermostats most commonly used with the Modine Hot Dawg Heater are single-stage room and two-stage room digital or duct thermostats. Additionally, low temperature thermostats are frequently paired with this heater. These thermostats can be set at lower temperature ranges than traditional residential room thermostats which typically have a range between 60°F to 80°F.
Is this unit set up to run on propane or natural gas?
The Hot Dawg runs on natural gas, but there is a conversion kit available from Modine which can convert it to propane.
Does the Heater vent to the outside of The Work space?
Yes! The venting system allows for vertical venting through the roof or horizontal venting through a wall. Please note that venting components must be purchased seperately and installed by a licensed professional.
Related Products
Modine Hot Dawg HD30 30,000 BTU Unit Heater NG 80% AFUE Power Vented Aluminized Steel Heat Exchanger HD30AS0111
Sold out
Specifications
| Product Line | Hot Dawg |
| Manufacturer Part Number | HD100AS-0111-FBAN |
| Applications | Unit Heater, Garage Heater, Workshop Heater, Loading Dock Heater, Supplemental Heater |
| Warranty | Parts: 2 Years, Heat Exchanger: 10 Years |
| Fuel Type | Natural Gas |
| Heating Capacity (BTUs) | 80000 BTU |
| Heat Exchanger Material | Aluminized Steel |
| Air Flow Capacity (CFM) | 1490 |
| AFUE | 80% |
| Vent Type | Power Vent |
| Orientation | Horizontal |
| Gas Conversion Kit | Available |
| Air Throw (feet from face of unit) | 42 |
| Gas Piping Diameter | 1/2 Inch |
| Flue Connection Size | 4 Inches |
| Voltage | 115 Volts |
| Frequency | 60 Hz |
| Phase | 1 |
| Certifications | UL Listed, CSA listed |
| Product Depth (in.) | 31 Inches |
| Product Height (in.) | 20 1/2 Inches |
| Product Width (in.) | 35 1/2 Inches |
| Product Dimensions (in.) | 20 1/2 x 35 1/2 x 31 Inches |
| Shipping Weight (lb.) | 125 pounds |
| Package Quantity | 1 |
| Import Designation | Made in USA |
| Country of Origin | United States |
| Service Manual | https://cdn.shopify.com/s/files/1/0482/0045/0206/t/4/assets/1643759afebc--HD-Troubleshooting-Guide-6-586.pdf?v=1631897135 |
| Install Guide | Hot_Dawg_Installation_and_Service_Manual_6-583.pdf |
